One Vanderbilt vs 111 West 57th Street

One Vanderbilt
111 West 57th Street

Comparing the One Vanderbilt and the 111 West 57th Street is interesting because they both stand in New York, NY, and were completed within 2 years of each other, but they were designed by different architects.

This offers a unique glimpse at how rival designers approached projects in the same city during the same era.

Height
427m
Floors
67

Height & Size

Height
435m
Floors
84

The 111 West 57th Street is clearly the larger tower of the two, both in terms of height and number of floors. It rises to 1427ft (435m) with 84 floors above ground, while the One Vanderbilt reaches 1401ft (427m) with 67 floors above ground.

Of course, each project may have faced different briefs or regulatory constraints, which we don't really know about and could also explain the outcome.

Style
Contemporary

Architectural Style

Style
Contemporary

Both the One Vanderbilt and the 111 West 57th Street were designed in line with the aesthetic conventions of the Contemporary style.

At the time, this style was at the height of its popularity. So both Kohn Pedersen Fox Associates and SHoP Architects followed what was in many ways expected of them, producing designs that fit comfortably within contemporary architectural norms, rather than breaking with convention.

Main use
Commercial

Uses

Main use
Residential

The One Vanderbilt is primarily commercial, while the 111 West 57th Street is primarily residential.

The 111 West 57th Street offers 60 residential units.

Structure
Trussed Frame
Facade
Curtain Wall

Structure & Facade

Structure
Frame
Facade
Curtain Wall

The two towers rely on different structural systems, reflecting distinct engineering strategies.

The One Vanderbilt uses a Trussed Frame structural system, which uses diagonal bracing in addition to beams and columns for stability, while the 111 West 57th Street uses a Frame system, that relies on a regular grid of columns and beams to sustain its weight.

Yet, when it comes to their facade, they both employed the same solution, a Curtain Wall facade.

A curtain wall is a non-load-bearing facade hung from the structural frame. It is anchored to floor slabs and transfers only its own weight and wind loads, allowing for sleek, glassy exteriors.

One Vanderbilt 111 West 57th Street
Kohn Pedersen Fox Associates Architect SHoP Architects
2013 Design Started 2012
2016 Design Ended 2015
2017 Construction Started 2015
2020 Year Completed 2022
Contemporary Architectural Style Contemporary
Commercial Current Use Residential
67 Floors Above Ground 84
4 Floors Below Ground 2
330 Last Floor Height 346
427 m Height (m) 435 m
427 Tip Height 435
162,600 m² Usable Area (m²) 53,141 m²
Trussed Frame Structure Type Frame
Steel Vertical Structure Material Reinforced Concrete
Poured Concrete Over Metal Decking Horizontal Structure Material Reinforced Concrete
No Facade Structural? Yes
Aluminium, Glass, Terracotta Main Facade Material Glass, Terracota, Broze
AECOM Tishman Construction Main Contractor JDS Construction Group
Jaros Baum & Bolles MEP Engineer Jaros Baum & Bolles
Severud Associates Consulting Engineers Structural Engineer WSP
Vidaris Facade Consultant Buro Happold
Gensler Interior Designer Studio Sofield
NY State NY
New York City New York
1 Vanderbilt Avenue Address 111 West 57th Street