1166 Avenue of the Americas Building vs One World Trade Center

1166 Avenue of the Americas Building
One World Trade Center

Comparing the 1166 Avenue of the Americas Building and the One World Trade Center is particularly interesting because they share the same skyline in New York, NY, and were both designed by Skidmore, Owings & Merrill. However, they were completed more than 40 years apart.

This offers a unique perspective on how the architect's style and the city's architecture evolved over time.

Height
183m
Floors
44

Height & Size

Height
541m
Floors
104

The One World Trade Center is clearly the larger tower of the two, both in terms of height and number of floors. It rises to 1775ft (541m) with 104 floors above ground, while the 1166 Avenue of the Americas Building reaches 600ft (183m) with 44 floors above ground.

One World Trade Center also offers more total built-up area, a total fo 3,500,000 sqf (325,161m2), which is about 1,939,106 sqf (180,149m2) more than what the 1166 Avenue of the Americas Building offers.

Of course, each project may have faced different briefs or regulatory constraints, which we don't really know about and could also explain the outcome.

Style
International Style

Architectural Style

Style
Contemporary

The 1166 Avenue of the Americas Building was designed in the International Style style, while the One World Trade Center reflects the principles of Contemporary.

The 1166 Avenue of the Americas Building represents a late expression of the International Style, a style already in decline in 1974 when it was completed. By contrast, the One World Trade Center followed the then mainstream Contemporary, embodying the dominant architectural direction of its time.

With 40 years between them, the comparison also reflects how quickly architectural priorities can shift from one dominant language to another.

Main use
Commercial

Uses

Main use
Commercial

Both the 1166 Avenue of the Americas Building and the One World Trade Center were designed to serve as commercial towers, and that has remained their main use since their completion, serving similar roles in the urban fabric.

Structure
Frame
Facade
Curtain Wall

Structure & Facade

Structure
Framed Tube In Tube
Facade
Curtain Wall

The two towers rely on different structural systems, reflecting distinct engineering strategies.

The 1166 Avenue of the Americas Building uses a Frame structural system, which relies on a regular grid of columns and beams to sustain its weight, while the One World Trade Center uses a Framed Tube In Tube system, that combines a strong central core with a perimeter tube of columns.

Yet, when it comes to their facade, they both employed the same solution, a Curtain Wall facade.

A curtain wall is a non-load-bearing facade hung from the structural frame. It is anchored to floor slabs and transfers only its own weight and wind loads, allowing for sleek, glassy exteriors.

1166 Avenue of the Americas Building One World Trade Center
Skidmore, Owings & Merrill Architect Skidmore, Owings & Merrill
1974 Year Completed 2014
International Style Architectural Style Contemporary
Commercial Current Use Commercial
44 Floors Above Ground 104
2 Floors Below Ground 5
170 Last Floor Height 386
183 m Height (m) 541 m
145012 Built-up Area (m²) 325161
28 Number of Elevators 73
Frame Structure Type Framed Tube In Tube
Steel Vertical Structure Material Steel
Concrete, Steel Horizontal Structure Material Poured Concrete Over Metal Decking
No Facade Structural? No
Aluminum, Glass Main Facade Material Glass, Steel
Jaros Baum & Bolles MEP Engineer Jaros Baum & Bolles
WSP Cantor Seinuk Structural Engineer WSP Group
KAWS, Roy Lichtenstein Collaborating Artist Kenneth Snelson
NY State NY
New York City New York
1166 6th Avenue Address 285 Fulton Street